Ghost Immobiliser Fitting
Secure your vehicle from key theft hacking, cloning and theft by using the first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to send you alerts when your vehicle is taken or damaged.
Installing an Ghost immobiliser is fairly simple for the skilled technician. Making use of the correct tools, insulation tape and heat shrink tubing is essential.
Getting Started
Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers guard your vehicle without the use of key fobs or LED indicators. Instead, they connect directly to the ECU's CAN data network. They can only be activated after entering a PIN sequence. This gives a more secure level of security against key hacking, cloning and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham must be completed with great agility and accuracy. It can be a bit like navigating a minefield; one misstep could cause irreparable damage to the circuits of your vehicle's electrical system. It is essential to comprehend the installation procedure and prepare your vehicle correctly.
You'll need to take out interior panels from the vehicle to make space for your immobiliser. Once you've found the perfect location to conceal it, use cable ties to fix it. Clean up your wiring by connecting loose wires and using insulation tape to cover the exposed connections. This can help reduce the chance of accidental short circuits, while improving the aesthetics and decreasing the likelihood of tampering by thieves.
Find a source of constant 12V power and a grounding source for the ghost immobiliser. Once you've located these connections, test the power cables with a multimeter to make sure they are delivering a consistent voltage. Finally, connect the CAN H and L wires from the immobiliser to the designated power source and grounding point.
After you've made all the necessary connections It is important to check them and inspect the immobiliser for signs of corrosion or damage. The process of entering a PIN and launching the car is a great way to test the system. This should be an integral part of your routine since it can help you spot any intermittent issues early on. Regular testing can help to improve the longevity of the device, and ensure it's running at its peak performance.
Preparing the Vehicle
The installation of the Ghost immobiliser can be a difficult task that requires tools and knowledge. A wiring diagram of the vehicle is vital to locate the right wires and making precise connections. A multimeter can help verify the electrical value and ensure security. Cable ties and insulation tape can be used to guard connections from being tampered with and to keep them neatly secured. Finally, a user guide will provide specific directions specifically tailored to your Ghost Immobiliser model.
Once installed the ghost immobiliser can prevent unauthorised engine starts by requiring the driver to input a unique code sequence using the buttons on the console or the steering wheel. This can be done manually or remotely via the mobile phone app and the code can be modified by the vehicle's owner at anytime. The device is also silent and unnoticeable by thieves as it does not emit any radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and then blocks the engine when a false signal is detected. The system is tamperproof and weatherproof, but it does not have LED indicators or key fobs to attract the attention of thieves.
It can be mounted behind or in a less visible area so that it's not easily spotted by thieves and doesn't interfere with the vehicle's performance. It can be tucked away in a small container, so it is less likely to be noticed by unscrupulous salespeople during a test-drive.
Its stealthy operation and integration with the vehicle's CAN bus system makes it a powerful deterrent to modern methods of car theft, such as key cloning and signal relay attacks. The system can be combined with other security measures to create a formidable barrier that will frustrate even the most persistent thieves. This is the reason why more insurance companies are now suggesting or even requiring ghost immobilisers to be installed, since they can drastically reduce monthly premiums.
Making the Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers are silent and prevent them from knowing when your vehicle has been turned on. They also stop high tech methods of theft, like OBD hacking. They can also be installed without leaving permanent marks on your vehicle which makes them a great option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and advanced solutions to prevent car theft. It makes use of the CAN data network to shut down your engine and generates a pin code that only you know, which means it's difficult for criminals to detect. It can be fitted in a variety of vehicles and works with many existing features, including car alarms and GPS trackers and steering wheel locks and door lock bypass systems.
If you choose to use an Ghost immobiliser for your vehicle, be sure to consult the wiring schematic to identify the wires that connect. Check their locations to make sure they are correct, and then label them or tape them to help keep track of them. You will also need to find a source of constant power (12V) and a grounding point for the system. Once you have the necessary components, you can start making connections to complete the installation.
When the ghost immobiliser is connected to the CAN bus, it will prevent your vehicle from starting until you enter a pin code using the buttons on the steering wheel or dashboard. This will stop ECU cloning and other methods of theft of vehicles. Additionally, it can be combined with other Thatcham-approved security equipment, such as alarms and tyre clamps to give your car an even greater degree of security.
As the UK automotive industry continues to expand, as do the options available for securing your vehicle. There are so many ways that thieves can get into your vehicle and steal it, therefore it's vital to do everything you can to ensure that it isn't taken. Ghost immobilisers are a popular choice among car owners who are accountable.
Testing G28 Car Keys with the vehicle's ECU through a CAN network. This prevents the engine from starting until a PIN code has been entered. This makes it very difficult for thieves to copy the key fob that you use to start your vehicle, and even harder to disable the system by hacking its electronic.
Ghost Immobilisers can also be used with GPS tracking devices to help you locate your vehicle if it's stolen. This isn't a common option for security products that are available from the market, but it's a great option to increase your security and provide assurance that your vehicle is protected.
The Ghost-II immobiliser not only provides enhanced security but also a pleasant experience for the user, by eliminating the need to use additional key fobs or devices. It is simple and intuitive PIN code entry that can be integrated seamlessly with your daily routine. It also comes with convenience features and deactivation modes that let you to temporarily disable the immobiliser in order to park or service your vehicle.
Before you begin the installation process, be familiar with your vehicle's wiring and prepare the tools. A basic set of hand tools will provide you with the flexibility to make precise connections and a multimeter is a great tool to determine electrical values. Insulation tape and heat-shrink tubing are vital to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to be in a well-lit space and wear the appropriate safety equipment when working with electrical and tool components.
You should test the Ghost immobiliser after you have completed the installation to make sure it's functioning properly. You should first try to start the vehicle without entering the PIN. If this fails, you'll have to test the system again and conduct a thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems, is a hidden device which cannot be recognized by thieves. It is also far more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA-approved, and recognized by a few insurance companies. This makes it a cost-effective investment that provides you with the peace of heart you deserve.